Lab Stands

Related products

• 

  Student Single Tissue Bath

  Capacity: 3.6 Liter with decent look

  Heaters 120 Watts

  A float switch provides a safety cut off should the water level fall

  below the minimum permitted level,

  Two modes for solution replacement emptying and filling

  Each tissue chamber has an adjustable gas diffuser for oxygenation and

  push toggle on the front of the unit control the filling and emptying of the

  tissue chambers via toggle switch.

  Perspex sheet wall thickness 8mm

  Magnetic Stirrer for uniform temperature

  The control system provides an LED display

  Inner Tissue Bath Standard 25ml Capacity Qty 1 with each Bath

  Detachable Stem Tissue Vessel, supplied as standard,

  for increased convenience when changing tissue vessels.

  (The tissue chamber portion of the tissue vessel can be removed

  without disturbing the stem or disconnecting the tubing for the warmed

  perfusate and drainage.

  Inner tissue bath Pyrex Material Graduated 25 ml Capacity

  O ring provide 2 set

  Warming Coil Round/Curve flat type

  Power: 220 Voltages

  Download:Student Single Tissue Bath

  Add to wishlist

  Quick view

  Read more
• 

  Rabbit Restrainer

  This restrainer can be used with the help of curved back acrylic plate. This curved plate has a slider at bottom which can slide in the bottom sliders on restrainers according to animal size. Height and length are adjusted using only one plate. Neck can be adjustable by sliding the front top plate and fixing it in the comfortable position neck slot. The floor os restrainer is specially made rough to avoid skidding.

  Download: b5

  Add to wishlist

  Quick view

  Read more
• 

  Single Tissue Bath 2

  The walls of this bath are made of heavy, transparent plastic, so that the specimen can be

  consultant and easily observed. The walls are 6mm thick. The tank measureThe two sides of the bath are extended to form a stand. The heating control housing is made of white plastic, offering the double advantage of being corrosion proof and an excellent electrical  insulator from the heater.

  Download:Single Tissue Bath 2

  Add to wishlist

  Quick view

  Read more
• 

  Double Tissue Bath

  The walls of this bath are made of heavy, transparent plastic, so that the specimen can be consultant and easily observed. The walls are 6mm (1/4 inch) thick. The tank measure 140 x 215 x 155mm ( 51/2 x 81/2 x 61/4 ) and has a capacity of  4.7 liters.

  The two sides of the bath are extended to form a stand. The heating control housing is made of white plastic, offering the double advantage of being corrosion proof and an excellent electrical  insulator from the heater.

  A drain hole with tubing and plug is located in the tank bottom and an overflow pope is mounted in the upper left edge of the tank, there is also tapered plastic cone in the tank bottom. Into which the soft rubber bung carrying the stem of the glass tissue bath fits, making a convenient leak proof joint. The water bath is heated by two simple, sturdy cartridge elements that are mounted through the fronts of the tank near the bottom and extend 50mm (2in) into it. These elements have a combined rating of 80 watts. The temperature of the water bath is controlled by a dial on the front panel that is graduated from 15 to 45 C, by 5 C increments. Inside the bath there is a metal tube that carries a sensitive thermostat sensing bead. This system maintains the bath within 0.5 C of  the desired temperature  once the bath temperature has stabilized. There is an indicator light in the front panel that glows when the bath is plugged into the AC line. There is also a second indicator light that glows whenever the heating circuit is energized. A screw-in fuse holder is also mounted on the front panel.

  Download:Double Tissue Bath

  Add to wishlist

  Quick view

  Read more