Rectus Muscle Apparatus
Rectus Muscle Apparatus
*Tissue Bath Pyrex Glass
*Laboratory Stand with stainless steel rod.
*Simple light aluminum lever with ink writing frontal point
*Silicon Tube for Tissue Bath
*Boss Head brass
*Tissue Bath holding clump with boss head
*Stopcock Teflon
Download: Rectus Muscle Apparatus
Related products
-
Double Tissue Bath
The walls of this bath are made of heavy, transparent plastic, so that the specimen can be consultant and easily observed. The walls are 6mm (1/4 inch) thick. The tank measure 140 x 215 x 155mm ( 51/2 x 81/2 x 61/4 ) and has a capacity of 4.7 liters.
The two sides of the bath are extended to form a stand. The heating control housing is made of white plastic, offering the double advantage of being corrosion proof and an excellent electrical insulator from the heater.
A drain hole with tubing and plug is located in the tank bottom and an overflow pope is mounted in the upper left edge of the tank, there is also tapered plastic cone in the tank bottom. Into which the soft rubber bung carrying the stem of the glass tissue bath fits, making a convenient leak proof joint. The water bath is heated by two simple, sturdy cartridge elements that are mounted through the fronts of the tank near the bottom and extend 50mm (2in) into it. These elements have a combined rating of 80 watts. The temperature of the water bath is controlled by a dial on the front panel that is graduated from 15 to 45 C, by 5 C increments. Inside the bath there is a metal tube that carries a sensitive thermostat sensing bead. This system maintains the bath within 0.5 C of the desired temperature once the bath temperature has stabilized. There is an indicator light in the front panel that glows when the bath is plugged into the AC line. There is also a second indicator light that glows whenever the heating circuit is energized. A screw-in fuse holder is also mounted on the front panel.
Download:Double Tissue Bath
-
Rabbit Restrainer
This restrainer can be used with the help of curved back acrylic plate. This curved plate has a slider at bottom which can slide in the bottom sliders on restrainers according to animal size. Height and length are adjusted using only one plate. Neck can be adjustable by sliding the front top plate and fixing it in the comfortable position neck slot. The floor os restrainer is specially made rough to avoid skidding.
Download: b5
-
Isolated Organ and Tissue 4
Temperature automatically held within 0.5oC
Dial graduated from 15o to 45oC in 5o increments
Large 11.2 liter Water Bath capacity for stable temperature in
Coils and Tissue Vessels
Magnetic stirrer ensures uniform bath temperature
250 watts off heating power for fast heat-up time
Flat Warning Coils lie flat against the sides of the tank,
leaving the center free for experimental procedures
Large capacity (400 ml) Flat Perfusate Warming Coils en-sure
a sufficient supply of temperature-controlled perfusate for the
mos lengthy assays
Detachable Stem Tissue Vessel,
supplied as standard, for increased convenience when changing
Tissue Vessels (The without disturbing the stem or disconnecting
the tubing for the warmed perfusate and drainage
Downlaod:Isolated Organ and Tissue 4

Reviews
There are no reviews yet.