Rabbit Holding Box

Related products

• 

  Double Tissue Bath

  The walls of this bath are made of heavy, transparent plastic, so that the specimen can be consultant and easily observed. The walls are 6mm (1/4 inch) thick. The tank measure 140 x 215 x 155mm ( 51/2 x 81/2 x 61/4 ) and has a capacity of  4.7 liters.

  The two sides of the bath are extended to form a stand. The heating control housing is made of white plastic, offering the double advantage of being corrosion proof and an excellent electrical  insulator from the heater.

  A drain hole with tubing and plug is located in the tank bottom and an overflow pope is mounted in the upper left edge of the tank, there is also tapered plastic cone in the tank bottom. Into which the soft rubber bung carrying the stem of the glass tissue bath fits, making a convenient leak proof joint. The water bath is heated by two simple, sturdy cartridge elements that are mounted through the fronts of the tank near the bottom and extend 50mm (2in) into it. These elements have a combined rating of 80 watts. The temperature of the water bath is controlled by a dial on the front panel that is graduated from 15 to 45 C, by 5 C increments. Inside the bath there is a metal tube that carries a sensitive thermostat sensing bead. This system maintains the bath within 0.5 C of  the desired temperature  once the bath temperature has stabilized. There is an indicator light in the front panel that glows when the bath is plugged into the AC line. There is also a second indicator light that glows whenever the heating circuit is energized. A screw-in fuse holder is also mounted on the front panel.

  Download:Double Tissue Bath

  Add to wishlist

  Quick view

  Read more
• 

  Organ Bath Modular-Teaching

  AWS provides complete hardware solutions and associated software for isolated tissues studies from simple, manual systems to automated, computer-controlled systems. The AWS Modular Single Chamber Organ Bath was developed to provide a practical and functional design. They are used basically in teaching, where their low demanding maintenance, ruggedness and ease of use guarantee excellent didactic performance. This Modular option consists of a Perspex organ bath with a tissue chamber, three-way stopcock for physiological solution exchange and a fine needle valve for gas regulation. To maintain a constant temperature in the tissue chamber a Thermo regulated Water Pump is available which can be used with up to four Single Chamber Organ Baths at once. All organ baths include tissue holders, transducer holders, Micropostioner and tissue chambers (25 ml volume is supplied standard; 5, 10, or 50 ml volumes are available on request). Optionally, the AWS Modular Organ Baths can be associated with transducers, amplifiers and data output software from several brands. Common configurations use AD Instrument LABCHART or PANLAB PROTOWIN software for data storage and analysis, including Dose/Response.

  Download:Organ Bath Modular-Teaching

  Add to wishlist

  Quick view

  Read more
• 

  Tissue Bath Sets

  Research Double Tissue Bath Set

  Digital Temperature Control (       Approved Made in Italy)

  Temp. Automatically held within 0.1°C.

  Control from 15° to 45°C in 0.1° increments.

  Large 11.2 L water bath capacity for stable temperature in coils and tissue vessels.

  Magnetic stirrer ensures uniform temp.

  250 watts of heating power for fast heat-up time.

  Warming coils lie flat against sides of tank, leaving center free for procedures.

  400 ml capacity flat perfusate warming coils ensure sufficient supply of temp. Controlled Perfusate for lengthy assays.

  Detachable stem tissue vessel, for increased convenience when changing tissue vessels (tissue chamber can be removed without disturbing stem or disconnecting tubing for warmed perfusate and drainage.

  Basic Double Tissue Bath Sets

  Temperature automatically held within 0.5°C.

  Dial graduated from 15° to 45°C in 5° increments.

  Fixed stem tissue vessels supplied as standard Student. Single Tissue Bath Set

  Downlaod:Tissue Bath Sets

  Add to wishlist

  Quick view

  Read more
• 

  Student Single Tissue Bath

  Capacity: 3.6 Liter with decent look

  Heaters 120 Watts

  A float switch provides a safety cut off should the water level fall

  below the minimum permitted level,

  Two modes for solution replacement emptying and filling

  Each tissue chamber has an adjustable gas diffuser for oxygenation and

  push toggle on the front of the unit control the filling and emptying of the

  tissue chambers via toggle switch.

  Perspex sheet wall thickness 8mm

  Magnetic Stirrer for uniform temperature

  The control system provides an LED display

  Inner Tissue Bath Standard 25ml Capacity Qty 1 with each Bath

  Detachable Stem Tissue Vessel, supplied as standard,

  for increased convenience when changing tissue vessels.

  (The tissue chamber portion of the tissue vessel can be removed

  without disturbing the stem or disconnecting the tubing for the warmed

  perfusate and drainage.

  Inner tissue bath Pyrex Material Graduated 25 ml Capacity

  O ring provide 2 set

  Warming Coil Round/Curve flat type

  Power: 220 Voltages

  Download:Student Single Tissue Bath

  Add to wishlist

  Quick view

  Read more