Isolated Organ and Tissue

This Heated Water Bath is for the most demanding research work.

It has two heaters having 250 watts of combined power.

The temperatur is automatically controlled by a sensitive thermistor

in a metal tube inside the bat to hold the bath water

temperature has stabilized. A magnetic stirrer in the bottom of the

tank slowly circulates the water to ensue uniform temperature.

These heaters are mounted through the front of the tank near the

bottom and extend 100 mm (4 in) into it. The desired temperature of

the Water Bath is set by a dial on the front panel that is graduated

from 15o to 45o C in 5o increments.

Two on/off switches and indicator lamps, one for power and the other

for the magnetic stirrer are on the front panel.

Download:Isolated Organ and Tissue

Category: Pharmacology

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Isolated Organ and Tissue”

Related products

Double Tissue Bath

The walls of this bath are made of heavy, transparent plastic, so that the specimen can be consultant and easily observed. The walls are 6mm (1/4 inch) thick. The tank measure 140 x 215 x 155mm ( 51/2 x 81/2 x 61/4 ) and has a capacity of 4.7 liters.

The two sides of the bath are extended to form a stand. The heating control housing is made of white plastic, offering the double advantage of being corrosion proof and an excellent electrical insulator from the heater.

A drain hole with tubing and plug is located in the tank bottom and an overflow pope is mounted in the upper left edge of the tank, there is also tapered plastic cone in the tank bottom. Into which the soft rubber bung carrying the stem of the glass tissue bath fits, making a convenient leak proof joint. The water bath is heated by two simple, sturdy cartridge elements that are mounted through the fronts of the tank near the bottom and extend 50mm (2in) into it. These elements have a combined rating of 80 watts. The temperature of the water bath is controlled by a dial on the front panel that is graduated from 15 to 45 C, by 5 C increments. Inside the bath there is a metal tube that carries a sensitive thermostat sensing bead. This system maintains the bath within 0.5 C of the desired temperature once the bath temperature has stabilized. There is an indicator light in the front panel that glows when the bath is plugged into the AC line. There is also a second indicator light that glows whenever the heating circuit is energized. A screw-in fuse holder is also mounted on the front panel.

Download:Double Tissue Bath

Read more
Tissue Bath Sets 2

Digital temperature control

Temperature automatically held within 0.1oC

from 15o to 50oC in 0.1o increments

Large 11.2 liter Water Bath capacity for stable temperature in

Coils and Tissue Vessels

Magnetic stirrer ensures uniform bath temperature

250 watts off heating power for fast heat-up time

Flat Warning Coils lie flat against the sides of the tank,

leaving the center free for experimental procedures

Large capacity (400 ml) Flat Perfusate Warming Coils en-sure

a sufficient supply of temperature-controlled perfusate for the

mos lengthy assays

Detachable Stem Tissue Vessel,

supplied as standard, for increased convenience when changing

Tissue Vessels (The without disturbing the stem or disconnecting

the tubing for the warmed perfusate and drainage

Downlaod:Tissue Bath Sets 2

Read more
Pharmacology Instruments

Ointment slabs 12″x12″in minimum 8mm thickness Heavy weight glass squares provide a hard nonporous surface for incorporating compounds into ointment bases. The roughened bottom minimizes movement. Smooth beveled edges resist chipping and make handling easier.

Download:b1

Read more
Student Single Tissue Bath

Capacity: 3.6 Liter with decent look

Heaters 120 Watts

A float switch provides a safety cut off should the water level fall

below the minimum permitted level,

Two modes for solution replacement emptying and filling

Each tissue chamber has an adjustable gas diffuser for oxygenation and

push toggle on the front of the unit control the filling and emptying of the

tissue chambers via toggle switch.

Perspex sheet wall thickness 8mm

Magnetic Stirrer for uniform temperature

The control system provides an LED display

Inner Tissue Bath Standard 25ml Capacity Qty 1 with each Bath

Detachable Stem Tissue Vessel, supplied as standard,

for increased convenience when changing tissue vessels.

(The tissue chamber portion of the tissue vessel can be removed

without disturbing the stem or disconnecting the tubing for the warmed

perfusate and drainage.

Inner tissue bath Pyrex Material Graduated 25 ml Capacity

O ring provide 2 set

Warming Coil Round/Curve flat type

Power: 220 Voltages

Download:Student Single Tissue Bath

Read more