Single Tissue Bath 2
The walls of this bath are made of heavy, transparent plastic, so that the specimen can be
consultant and easily observed. The walls are 6mm thick. The tank measureThe two sides of the bath are extended to form a stand. The heating control housing is made of white plastic, offering the double advantage of being corrosion proof and an excellent electrical insulator from the heater.
Download:Single Tissue Bath 2
Related products
-
Isolated Organ and Tissue 2
This Heated Water Bath is for the most demanding research work.
It has two heaters having 250 watts of combined power.
The temperatur is automatically controlled by a sensitive thermistor
in a metal tube inside the bat to hold the bath water
temperature has stabilized. A magnetic stirrer in the bottom of the
tank slowly circulates the water to ensue uniform temperature.
These heaters are mounted through the front of the tank near the
bottom and extend 100 mm (4 in) into it. The desired temperature of
the Water Bath is set by a dial on the front panel that is graduated
from 15o to 45o C in 5o increments.
Two on/off switches and indicator lamps, one for power and the other
for the magnetic stirrer are on the front panel.
Download:Isolated Organ and Tissue 2
-
Tissue Bath Sets 2
Digital temperature control
Temperature automatically held within 0.1oC
from 15o to 50oC in 0.1o increments
Large 11.2 liter Water Bath capacity for stable temperature in
Coils and Tissue Vessels
Magnetic stirrer ensures uniform bath temperature
250 watts off heating power for fast heat-up time
Flat Warning Coils lie flat against the sides of the tank,
leaving the center free for experimental procedures
Large capacity (400 ml) Flat Perfusate Warming Coils en-sure
a sufficient supply of temperature-controlled perfusate for the
mos lengthy assays
Detachable Stem Tissue Vessel,
supplied as standard, for increased convenience when changing
Tissue Vessels (The without disturbing the stem or disconnecting
the tubing for the warmed perfusate and drainage
Downlaod:Tissue Bath Sets 2
-
Broome Restrainers
These popular Broome Restrainers provides fast and easy animal insertion. The cylindrical design of these Restrainers solves the problem of the rodents turning once they are introduced into the Restrainer.
To place the animal into the Restrainer, loosen white Derlin nose piece and grasp the animal by the tail. Slide the animal into the Restrainer by pulling its tail along the open groove until the animal is completely enclosed in the cylinder. Then slide the nose piece into the groove on the opposite side of the Restrainer and place it up to the nose of the animal.
Download:Broome Restrainers

Reviews
There are no reviews yet.