Lab Stand

Related products

• 

  Student Double Tissue Bath

  1              Capacity: 5 Liter with decent look

  2              Heaters 120 Watts

  3              A float switch provides a safety cut off should the water level fall

  below the minimum permitted level,

  4              Two modes for solution replacement emptying and filling

  5              Each tissue chamber has an adjustable gas diffuser for oxygenation and

  push toggle on the front of the unit control the filling and emptying of the

  tissue chambers via toggle switch.

  6              Perspex sheet wall thickness 10mm

  7              Magnetic Stirrer for uniform temperature

  8              The control system provides an LED display

  9              Inner Tissue Bath Standard 25 ml Capacity Qty 2 with each Bath

  10           Detachable Stem Tissue Vessel, supplied as standard,

  for increased convenience when changing tissue vessels.

  (The tissue chamber portion of the tissue vessel can be removed

  without disturbing the stem or disconnecting the tubing for the warmed

  perfusate and drainage.

  11           Inner tissue bath Pyrex Material Graduated 25 ml Capacity

  12           O ring provide 2 set

  13           Warming Coil Round/Curve flat type

  14           Power: 220 Voltages

  Downlaod:Student Double Tissue Bath

  Add to wishlist

  Quick view

  Read more
• 

  Basic Single Tisue Bath

  The walls of this bath are made of heavy, transparent plastic, so that the  specimen can be consultant and easily observed. The tank is 100mm in  diameter by 125mm high (4 x 5 in) and has a capacity of 800ml. Tank is solidly cemented to the base, which is constructed of formed white plastic. The plastic base offers the double advantage of not only being corrosion proof, but also serving as an excellent electrical insulator from the heater. A drain hole with tubing and plug is located in the bottom of the tank. There is also a tapered plastic cone in the bank bottom, into which the soft rubber bung carrying the stem of the glass tissue bath fits, making a convenient leak proof joint. The water bath is heated by a simple, sturdy cartridge element that is mounted off-center through the bottom on the tank. This heater has a rating of 50 watts. The temperature is controlled by an energy regulator mounted on the front of the bath. The dial has a position for “full energy” while the bath is being brought up to its desired temperature. A hole in three corners of the base can be used  for uprights.

  Download:Basic Single Tisue Bath

  Add to wishlist

  Quick view

  Read more
• 

  Student Single Tissue Bath

  Capacity: 3.6 Liter with decent look

  Heaters 120 Watts

  A float switch provides a safety cut off should the water level fall

  below the minimum permitted level,

  Two modes for solution replacement emptying and filling

  Each tissue chamber has an adjustable gas diffuser for oxygenation and

  push toggle on the front of the unit control the filling and emptying of the

  tissue chambers via toggle switch.

  Perspex sheet wall thickness 8mm

  Magnetic Stirrer for uniform temperature

  The control system provides an LED display

  Inner Tissue Bath Standard 25ml Capacity Qty 1 with each Bath

  Detachable Stem Tissue Vessel, supplied as standard,

  for increased convenience when changing tissue vessels.

  (The tissue chamber portion of the tissue vessel can be removed

  without disturbing the stem or disconnecting the tubing for the warmed

  perfusate and drainage.

  Inner tissue bath Pyrex Material Graduated 25 ml Capacity

  O ring provide 2 set

  Warming Coil Round/Curve flat type

  Power: 220 Voltages

  Download:Student Single Tissue Bath

  Add to wishlist

  Quick view

  Read more
• 

  Organ Bath Modular-Teaching

  AWS provides complete hardware solutions and associated software for isolated tissues studies from simple, manual systems to automated, computer-controlled systems. The AWS Modular Single Chamber Organ Bath was developed to provide a practical and functional design. They are used basically in teaching, where their low demanding maintenance, ruggedness and ease of use guarantee excellent didactic performance. This Modular option consists of a Perspex organ bath with a tissue chamber, three-way stopcock for physiological solution exchange and a fine needle valve for gas regulation. To maintain a constant temperature in the tissue chamber a Thermo regulated Water Pump is available which can be used with up to four Single Chamber Organ Baths at once. All organ baths include tissue holders, transducer holders, Micropostioner and tissue chambers (25 ml volume is supplied standard; 5, 10, or 50 ml volumes are available on request). Optionally, the AWS Modular Organ Baths can be associated with transducers, amplifiers and data output software from several brands. Common configurations use AD Instrument LABCHART or PANLAB PROTOWIN software for data storage and analysis, including Dose/Response.

  Download:Organ Bath Modular-Teaching

  Add to wishlist

  Quick view

  Read more